LINP-12R Closed And Short Design Precision Linear Bearings

LINP-12R Closed and Short Precision Linear Bearings
• Enclosed and short size
• High precision similar to preloaded ball bearing
• Standard liner material: TEFPLASTM B, available materials: TEFPLASTM G & FDA approved TEFPLASTM E
• Anodized aluminum adapter
• Axial secured by circlips
• Maintenance-free and low noise
• Operation temperature: ±200℃
Standard Products |
Housing: H7; Shaft: h6~h7
Part No. | d1 [mm] | Tolerance [mm] | d2 h7 [mm] | B h10 [mm] | O H10 [mm] | do H10 [mm] | e [mm] |
LINPB-12R-08 | 8 | +0.013/+0.035 | 15 | 24 | 2.0 | 12.2 | 10 |
LINPB-12R-10 | 10 | +0.013/+0.035 | 17 | 26 | 2.0 | 14.4 | 12 |
LINPB-12R-12 | 12 | +0.016/+0.043 | 19 | 28 | 2.0 | 16.6 | 14 |
LINPB-12R-16 | 16 | +0.016/+0.043 | 24 | 30 | 2.0 | 21.3 | 14 |
LINPB-12R-20 | 20 | +0.020/+0.053 | 28 | 30 | 2.0 | 25.5 | 14 |
LINPB-12R-25 | 25 | +0.020/+0.053 | 35 | 40 | 3.2 | 30.9 | 22 |
LINPB-12R-30 | 30 | +0.020/+0.053 | 40 | 50 | 3.2 | 35.9 | 30 |
LINPB-12R-40 | 40 | +0.020/+0.064 | 52 | 60 | 4.1 | 46.2 | 40 |
LINPB-12R-50 | 50 | +0.020/+0.064 | 62 | 70 | 4.1 | 56.3 | 50 |
Load Capacity |
Part No. | Shaft [mm] | Housing [mm] | F max. [N] Dynamic Load P=5MPa | F max. [N] Static Load P=35MPa | Weight [g] | ||||
B | G | E | B | G | E | ||||
LINPB-12R-08 | 8 | 15 | 1920 | 1536 | 1152 | 3840 | 3072 | 2304 | 7 |
LINPB-12R-10 | 10 | 17 | 2600 | 2080 | 1560 | 5200 | 4160 | 3120 | 9 |
LINPB-12R-12 | 12 | 19 | 3360 | 2688 | 2016 | 6720 | 5376 | 4032 | 11 |
LINPB-12R-16 | 16 | 24 | 4800 | 3840 | 2880 | 9600 | 7680 | 5760 | 18 |
LINPB-12R-20 | 20 | 28 | 6000 | 4800 | 3600 | 12000 | 9600 | 7200 | 23 |
LINPB-12R-25 | 25 | 35 | 10000 | 8000 | 6000 | 20000 | 16000 | 12000 | 44 |
LINPB-12R-30 | 30 | 40 | 15000 | 12000 | 9000 | 30000 | 24000 | 18000 | 65 |
LINPB-12R-40 | 40 | 52 | 24000 | 19200 | 14400 | 48000 | 38400 | 28800 | 123 |
LINPB-12R-50 | 50 | 62 | 35000 | 28000 | 21000 | 70000 | 56000 | 42000 | 177 |
Features of LINP Series Product |
• LINP precision linear bearings have the same dimensional accuracy as metal ball linear bearings with higher load capacity and extremely low operating noise. The liners are made of TEFPLASTM compounds material developed for maintenance-free and low friction coefficient. LINP linear bearings are suitable for ±200℃ operation temperature. LINP small gap operation method with TEFPLASTM materials will not damage the shaft but clean the dirt on the surface.
• Self-lubricating, maintenance-free
• High precision and smooth operation
• Vibration reduction, no noise
• High-speed operation and long service life
• Good solution for linear, rotary and swing motion