LINP-11RS Closed Floating Precision Linear Bearings
LINP-11RS Closed Floating Precision Linear Bearings
● Closed and self-aligning design
● High precision same as ball bearing
● Liner materials: TEFPLASTM B, G and E
● Adapter of anodized aluminum Alloy
● Fixed axially by Circlips
● Maintenance-free and less noise
● Working temperature ±200 Degrees
| Standard Specification |
Housing: H7; Shaft: h6-h7
| Part No. | d1 [mm] | Tolerance [mm] | d2 h6 [mm] | B h10 [mm] | B1 H10 [mm] | dn h10 [mm] | s H10 [mm] | ds h10 [mm] |
| LINPB-11RS-08 | 8 | +0.013/+0.035 | 15.8 | 25 | 16.4 | 15.0 | 1.1 | 15.5 |
| LINPB-11RS-10 | 10 | +0.013/+0.035 | 18.8 | 29 | 21.8 | 17.5 | 1.3 | 18.5 |
| LINPB-11RS-12 | 12 | +0.016/+0.043 | 21.8 | 32 | 22.8 | 20.5 | 1.3 | 21.5 |
| LINPB-11RS-16 | 16 | +0.016/+0.043 | 25.8 | 36 | 24.9 | 24.2 | 1.3 | 25.5 |
| LINPB-11RS-20 | 20 | +0.020/+0.053 | 31.8 | 45 | 31.5 | 29.6 | 1.6 | 31.5 |
| LINPB-11RS-25 | 25 | +0.020/+0.053 | 39.8 | 58 | 44.1 | 36.5 | 1.85 | 39.0 |
| LINPB-11RS-30 | 30 | +0.020/+0.053 | 46.7 | 68 | 52.1 | 43.5 | 1.85 | 46.0 |
| LINPB-11RS-40 | 40 | +0.020/+0.064 | 61.7 | 80 | 60.9 | 57.8 | 2.15 | 61.0 |
| LINPB-11RS-50 | 50 | +0.020/+0.064 | 74.7 | 100 | 78.0 | 70.5 | 2.65 | 74.0 |
| Part No. | do h10 [mm] | O+0.1 [mm] | e [mm] | R [mm] |
| LINPB-11RS-08 | 13.2 | 1.86 | 5.0 | 20 |
| LINPB-11RS-10 | 15.4 | 1.86 | 5.0 | 13 |
| LINPB-11RS-12 | 18.4 | 1.86 | 6.0 | 18 |
| LINPB-11RS-16 | 20.4 | 2.86 | 8.0 | 32 |
| LINPB-11RS-20 | 26.4 | 2.86 | 10.0 | 50 |
| LINPB-11RS-25 | 34.4 | 2.86 | 12.5 | 39 |
| LINPB-11RS-30 | 41.4 | 2.86 | 15.0 | 57 |
| LINPB-11RS-40 | 56.4 | 2.86 | 20.0 | 100 |
| LINPB-11RS-50 | 69.4 | 2.86 | 25.0 | 157 |
| Load Capacity |
▊ Load Capacity of LINPB-11RS Series Precision Linear Bearings
Part No. | Max. Dynamic Load [N] | Max. Static Load [N] | Weight | ||||
B | G | E | B | G | E | [g] | |
LINPB-11RS-08 | 2000 | 1600 | 1200 | 4000 | 3200 | 2400 | 8 |
LINPB-11RS-10 | 2900 | 2320 | 1740 | 5800 | 4640 | 3480 | 15 |
LINPB-11RS-12 | 3840 | 3072 | 2304 | 7680 | 6144 | 4608 | 18 |
LINPB-11RS-16 | 5760 | 4608 | 3456 | 11520 | 9216 | 6912 | 39 |
LINPB-11RS-20 | 9000 | 7200 | 5400 | 18000 | 14400 | 10800 | 42 |
LINPB-11RS-25 | 14500 | 11600 | 8700 | 29000 | 23200 | 17400 | 119 |
LINPB-11RS-30 | 20400 | 16320 | 12240 | 40800 | 32640 | 24480 | 149 |
| LINPB-11RS-40 | 32000 | 25600 | 19200 | 64000 | 51200 | 38400 | 333 |
| LINPB-11RS-50 | 50000 | 40000 | 30000 | 100000 | 80000 | 60000 | 823 |
| Precision Shafts |
 Precision Aluminum Shafts ● The recommended shaft material for all linear plain bearings made of EPB13 ● Material: EN AW 6061/6060 ● Straightness: EN 754-3 ● Hardness: 75 HB ● Surface: hard anodized ● Surface hardness: 450-550 HV |
 Precision Steel Shafts ● Cost-effective steel shafts ● Also completely supported and assembled with standard aluminium support ● C45 steel, hard-chromed ● Hardness: 60 HRC |
 Precision stainless steel shafts ● High corrosion-resistance ● Also completely supported and assembled with standard aluminium support ● Ideal solution for the wet area ● 304 Stainless steel, hardened |
 Shaft end blocks The shaft support block is used for shaft end fixing, including standard and flange design with locking screw, made of aluminum alloy so low weight. The flange design used for fixed from the side and smaller installation space than the standard design. |
| Chemical Resistance |
TEFPLASTM materials are made for harsh environments. They provide excellent performance in the submerged application.
The filler in the TEFPLASTM B material may be corroded by deionized water or other strong chemicals; while TEFPLASTM G and E materials are inert to almost all chemicals.
The standard shell material of precision linear bearings is anodized aluminum CSB-LIN® P. It is good chemical resistant in most industrial applications. The option of #316 stainless steel shell is a good choice for environments with strong corrosive chemical liquids.
