Noiseless Cable Chain
C04 Noiseless Cable Chain
The C04 noiseless cable chain is very lightweight and suitable for clean room use. The special elastic structure design for rotating connection eliminates the impact sound in motion, making it an ideal choice for high dynamic and clean room applications.
● Flexible connection and small spacing, low noise, smooth operation
● The crossbar can move along the inner radius and the outer radius
● Open design, fast cable filling
● Dynamic and quiet, suitable for clean room applications
|C04.28 Noiseless Cable Chain|
The C04.28 noise-free cable chain is very lightweight and suitable for clean room use. The special elastic structure design of the rotating connection eliminates the impact noise of the movement, making it an ideal choice for high dynamic and clean room applications.
● Long-term application temperature：-40/+120℃
● Inner height：28 mm
● Inner width：30-60 mm
● Bend radius：55-150 mm
● Link pitch：22 mm
PDF Downloading: C04.28 Noiseless Cable Chain
CSB-PCC® chains placed on their side can be used unsupported to a limited extent. The turned unsupported length in this case is dependent on the following factors:
1. Fill weight
2. Width of the chain
3. Bend radius
4. Parallel placement
We recommend locking mounting brackets for sidemounted applications
The greater the weight of the chain, the shorter the usable unsupported length. When placed on the side, the width of the chain is actually the height. As the height increases, the chain becomes proportionally more stable. If further movement of the second axis is added to the parallel movement of the two chains, it will weaken the unsupported length. For light weight applications, a bracket supported by a standard mounting chain is sufficient. However, if the entire vehicle is heavy and has a long stroke, the chain must be fully or partially supported. Due to the variety of application possibilities, we strongly recommend that you use our consulting services.
If the installation height is restricted, it is strongly recommended to install the chain sideways.
According to requirements, the side does not support the standard value of length. The unsupported length can be extended by supporting the chain link next to the mounting bracket.